 |
 |
 |
Metallographic Compression Mounting Presses
 |
 |
 |
|
|---|---|---|---|
| Compression Mounting Presses | TERAPRESS 7001B | TERAPRESS 7200 TERAPRESS 7500 |
TERAPRESS 7700 |
| Force | Pneumatic | Electro-Hydraulic | Electro-Hydraulic |
| Mold Cylinders | Single | Single | Dual |
| Mold Assemblies and Spacers | TP-7001B molds | TP-7200 mold/heater TP-7500 molds |
TP-7700 molds |
TERAPRESS TP-7001B Pneumatic Automatic Mounting Press (BEST VALUE)
The TERAPRESS TP-7001B automated air pressure mounting press (Part No. TP-7001B) has a solid, easy-to-use, robust design. With a 360° heating element intimately connected to the mold, heating is very efficient. In addition to being efficient, the TERAPRESS TP-7001B offers users more control for both the heating and cooling cycle as compared to most competitive compression mounting presses. By using air pressure to maintain a constant force on the specimen, the requirement to continually monitor and increase the force as the resin begins to melt is eliminated.
|
|
TERAPRESS TP-7200 Hydraulic Mounting Press (NEW - OPTIMUM PERFORMANCE)
The TERAPRESS TP-7200 programmable electro-hydraulic fixed mold automated mounting press (Part No. TP-7200) has a solid, easy to use, robust design. With electro-hydraulic force and heating up to 200°C, molding is very efficient.
|
|
TERAPRESS TP-7500 Hydraulic Interchangeable Mold Mounting Press (NEW)
The TERAPRESS TP-7500 programmable electro-hydraulic automated mounting press (Part No. TP-7500) has a solid, easy to use, robust design. With electro-hydraulic force and heating up to 200°C, molding is very efficient.
|
|
TERAPRESS TP-7700 Dual Cylinder Hydraulic Mounting Press (NEW)
The TERAPRESS TP-7700 is a programmable, dual cylinder, electro-hydraulic automated mounting press (Part No. TP-7700) with a solid, easy to use, robust design. With electro-hydraulic force and heating up to 200°C, molding is very efficient.
|
|
Molds and Accessories for TP-7001
|
| TP-7001B Spacers | Part Number (Flat Spacer) |
Part Number
(Chamfered Spacer) |
|---|---|---|
| 1-in spacer for double mounts | TPS-0100 | TPS-0100C |
| 1.25-in spacer for double mounts | TPS-0125 | TPS-0125C |
| 1.5-in spacer for double mounts | TPS-0150 | TPS-0150C |
| 2-in spacer for double mounts | TP-0200 | TPS-0200C |
| 25 mm spacer for double mounts | TPS-25 | TPS-25C |
| 30 mm spacer for double mounts | TPS-30 | TPS-30C |
| 40 mm spacer for double mounts | TPS-40 | TPS-40C |
| 50 mm spacer for double mounts | TPS-50 | TPS-50C |
Molds and Accessories for TP-7200
| TP-7200 Molds | Part Number (Flat Ram) | Part Number (Chamfered Ram) |
|---|---|---|
| 1.25-in diameter mounting assembly | TP72-0125 | TP72-0125C |
| 1.5-in diameter mounting assembly | TP72-0150 | TP72-0150C |
| 2-in diameter mounting (rams only) | TP72-0200 | TP72-0200C |
| TP-7200 Spacers | Part Number (Flat Ram) | Part Number (Chamfered Ram) |
|---|---|---|
| 1.25-in spacer for double mounts | TPS-0125 | TPS-0125C |
| 1.5-in spacer for double mounts | TPS-0150 | TPS-0150C |
| 2-in spacer for double mounts | TPS-0200 | TPS-0200C |
Molds and Accessories for TP-7500/ TP-7700
| TP-7500/ TP-7700 Molds | Part Number (Flat Ram) | Part Number (Chamfered Ram) |
|---|---|---|
| 1.25-in diameter mounting assembly | TP-75-0125 | TP-75-0125C |
| 1.5-in diameter mounting assembly | TP-75-0150 | TP-75-0150C |
| 2-in diameter mounting (rams only) | TP-75-0200 | TP-75-0200C |
| TP-7500/ TP-7700 Spacers | Part Number (Flat Ram) | Part Number (Chamfered Ram) |
|---|---|---|
| 1.25-in spacer for double mounts | TPS-0125 | TPS-0125C |
| 1.5-in spacer for double mounts | TPS-0150 | TPS-0150C |
| 2-in spacer for double mounts | TPS-0200 | TPS-0200C |
PACE TECHNOLOGIES CONTACT
PACE Technologies
3601 E. 34th St.
Tucson, Arizona 85713
+1-520-882-6598
FAX +1-520-882-6599
email: pace@metallographic.com
https://www.metallographic.com
Information Requests
Copyright 2006-2020
PACE Technologies ® -
3601 E. 34th St., Tucson, AZ 85713,
USA
Telephone +1-520-882-6598 FAX +1-520-882-6599
All Rights Reserved
